GS-500-3pm polyhedron UV curing machine high energy cold light source flat UV curing machine

Product application

This UV curing machine is specially designed for curing and drying after UV screen printing of small motor shell logo and decorative pattern. It is also suitable for UV glue curing and screen printing UV ink curing

Application examples: polyhedral products such as color screen printing of electrical appliance shell logo, UV screen printing and UV curing of range hood shell, UV printing and UV curing of gift stationery packaging box, UV screen printing of lamp shell, glass metal workpiece screen printing and UV curing;

Product features

Two groups of UV lamps are configured, which can be controlled separately. The distance between the UV lamp and the strip surface is adjustable. The focusing reflector is configured, and the illumination is uniform; The upper exhaust air and lower suction air are used together, and the cooling system is reasonable to make the UV lamp irradiate at full power; The adjustable light box design is convenient for the wiping of UV lamp and reflector and the replacement of UV lamp, and the maintenance is simple. Various station fixtures can be installed on the conveyor belt according to customer requirements, and the conveying speed can be adjusted within the effective range; The main components adopt standard configuration to ensure stable performance.

Technical parameter

Power requirements: three phase five wire 380VAC (power frequency AC) 50Hz (Hz)

Overall power: about 18.5.0kw (kw)

Overall dimension: 3000 L (length) × 1150 (width) × 1880h (height) mm

Conveying speed: 1-11 M / min (M / min)

Conveying width: 500mm (mm)

Mesh belt material: Teflon mesh belt or stainless steel mesh belt

Light source type: high pressure Hg mercury lamp

Lamp line power: 110W / cm

Light source configuration: 3, 5.2kw

Service life of light source: more than 1000 (H) hours on average, and the light attenuation shall not be less than 80%

Main peak wavelength: 365nm (nm)

Power regulation: 20 ~ 100% full power stepless regulation

Typical application: suitable for non explosion proof environment

UV lamp reflector: aluminum alloy reflector, titanium plated reflective aluminum sheet and CF cold mirror are installed to facilitate dust-free cleanliness and reduce product surface temperature.

Light source type: high pressure Hg mercury lamp

Cooling mode: forced air cooling

Transmission system: gear reducer and sprocket; Conveying speed: 2-11m / min, VR stepless speed regulation, LED digital speed display. The conveying direction faces the machine control panel from left to right

Control panel: UV lamp ammeter, lighting operation integrator, overtemperature indicator, lighting completion indicator

Power indicator, start switch, stop switch, UV light switch, strong and weak light switch.

GS-500-3PM 多面體UV固化機 高能量冷光源FLAT UV Curing Machine

產品用途 Application
此紫外線固化機，專為小家電機外殼LOGO及修飾花紋UV絲印后固化干燥設計，也適合UV膠水固化，絲印UV油墨固化
應用實例：電器機殼LOGO套色絲印、油煙機外殼UV絲印光固、禮品文具包裝盒UV印刷光固、燈具外殼UV絲印、玻璃金屬工件絲印UV固化等多面體產品；

產品特點 Feature
雙組UV燈配置，可分別控制，UV燈距板帶面距離可調，聚焦型反射裝置配置，光照均勻；上排風及下吸風配套使用,冷卻系統合理，使UV燈滿功率輻照；調式燈箱設計，便于UV燈和反射罩擦拭及UV燈的更換，維護簡便。輸送帶上可按客戶要求安裝各種工位治具，輸送速度在有效范圍內均可調節；主要組件采用標準配置，確保性能穩定。

技術參數 Parameter
電源要求：三相五線380VAC（工頻交流） 50HZ（赫茲）
整機功率：約18.5.0KW（千瓦）
外形尺寸：3000 L（長）×1150（寬）×1880H（高） mm
輸送速度：1-11 m/min（米/分鐘）
輸送寬度：500mm（毫米）
網帶材料：特氟龍網帶或不銹鋼網帶
光源類型：高壓Hg汞燈
燈線功率：110w/cm
光源配置：3支，5.2KW
光源壽命：平均大于1000（h）小時，光衰不低于80％
主峰波長：365nm（納米）
功率調節：20~100%滿功率無極調節

典型應用：適應于非防爆要求環境

UV燈反射罩：鋁合金反射罩配合鍍鈦反射鋁片，裝CF冷鏡以利于無塵潔凈度及降低產品表面溫度。

光源類型：高壓Hg汞燈

冷卻方式：強制風冷

傳動系統：齒輪減速機、鏈輪；輸送速度：2-11m/min VR無級調速，LED數字式速度顯示。輸送方向面對機臺控制面板由左往右輸送

控制面版：UV燈電流表、點燈運轉積時器、超溫指示燈、點燈完成指示燈、

電源指示燈、啟動開關、停止開關、UV燈開關、強弱光切換開關。