GS-700-2PM low temperature dual lamp flat UV curing machine

Product application

This UV curing machine is specially designed for curing and drying after UV screen printing of small motor shell logo and decorative pattern. It is also suitable for UV glue curing and screen printing UV ink curing

Application examples: screen printing, lithography, relief printing, self-adhesive trademark, metal nameplate, KT board, glass, ceramics, electronic parts, single-sided circuit board and other substrates are printed with special effects such as crystal ice flower, frosting, crystal gem, colorful convex oil and so on. Coating: bright coating on wood surface, paper polishing, plastic floor and optical fiber line surface coating.

Product features

Two groups of UV lamps are configured, which can be controlled separately. The distance between the UV lamp and the strip surface is adjustable. The focusing reflector is configured, and the illumination is uniform; The upper exhaust air and lower suction air are used together, and the cooling system is reasonable to make the UV lamp irradiate at full power; The adjustable light box design is convenient for the wiping of UV lamp and reflector and the replacement of UV lamp, and the maintenance is simple. Various station fixtures can be installed on the conveyor belt according to customer requirements, and the conveying speed can be adjusted within the effective range; The main components adopt standard configuration to ensure stable performance.

?  Custom length, height or width

?  Stainless steel clean room applications

? UV/IR combination available

? Nitrogen curing environment optional

? Reciprocating lamps option (heat sensitive curing) ? Designed for microwave or mercury arc UV curing systems

? 5-160 FPM variable speed control with FPM indicator ? Adjustable height: 29” - 41”

? Maximum vacuum hold-down area

? 300 and/or 400 W/inch output

? Mercury/metal halide lamps

? UV-resistant coated fiberglass belt

Technical parameter

Power requirements: three phase five wire 380VAC (power frequency AC) 50Hz (Hz)

Overall power: about 16.5kw (kw)

Overall dimension: 3600 L (length) × 980 (width) × 1780h (height) mm

Conveying speed: 2-11m / min (M / min)

Conveying width: 700mm (mm)

Mesh belt material: Teflon mesh belt or stainless steel mesh belt

Lamp line power: 100W / cm

Light source configuration: 2, 7.2kw

Service life of light source: more than 1000 (H) hours on average, and the light attenuation shall not be less than 80%

Main peak wavelength: 365nm (nm)

Power regulation: 100% full power

GS-700-2PM 低溫款雙燈平面UV固化線 FLAT UV Curing Machine

產品用途 Application
此紫外線固化機，專為小家電機外殼LOGO及修飾花紋UV絲印后固化干燥設計，也適合UV膠水固化，絲印UV油墨固化

應用實例：網版印刷、平版印刷、凸版印刷、自粘商標、金屬銘牌、KT板、玻璃、陶瓷、電子零件、單面電路板等基材上印制晶體冰花、磨砂、水晶寶石、七彩凸油等特殊效果。涂裝方面:木材表面光亮涂裝、紙面上光、塑膠地板、光纖線表面涂裝。

產品特點 Feature
雙組UV燈配置，可分別控制，UV燈距板帶面距離可調，聚焦型反射裝置配置，光照均勻；上排風及下吸風配套使用,冷卻系統合理，使UV燈滿功率輻照；調式燈箱設計，便于UV燈和反射罩擦拭及UV燈的更換，維護簡便。輸送帶上可按客戶要求安裝各種工位治具，輸送速度在有效范圍內均可調節；主要組件采用標準配置，確保性能穩定。

?  Custom length, height or width

?  Stainless steel clean room applications

? UV/IR combination available

? Nitrogen curing environment optional

? Reciprocating lamps option (heat sensitive curing) ? Designed for microwave or mercury arc UV curing systems

? 5-160 FPM variable speed control with FPM indicator ? Adjustable height: 29” - 41”

? Maximum vacuum hold-down area

? 300 and/or 400 W/inch output

? Mercury/metal halide lamps

? UV-resistant coated fiberglass belt

技術參數 Parameter
電源要求：三相五線380VAC（工頻交流） 50HZ（赫茲）
整機功率：約16.5KW（千瓦）
外形尺寸：3600 L（長）×980（寬）×1780H（高） mm
輸送速度：2-11m/min（米/分鐘）
輸送寬度：700mm（毫米）
網帶材料：特氟龍網帶或不銹鋼網帶
燈線功率：100w/cm
光源配置：2支，7.2KW
光源壽命：平均大于1000（h）小時，光衰不低于80％
主峰波長：365nm（納米）
功率調節：100%滿功率
UV燈反射罩：鋁合金反射罩配合鍍鈦反射鋁片，裝CF冷鏡以利于無塵潔凈度及降低產品表面溫度。

光源類型：高壓Hg汞燈

冷卻方式：強制風冷

傳動系統：齒輪減速機、鏈輪；輸送速度：2-11m/min VR無級調速，LED數字式速度顯示。輸送方向面對機臺控制面板由左往右輸送

控制面版：UV燈電流表、點燈運轉積時器、超溫指示燈、點燈完成指示燈、

電源指示燈、啟動開關、停止開關、UV燈開關、強弱光切換開關。

典型應用：適應于非防爆要求環境