Beicang Machinery Manufacturing Flame Pretreatment System (Brand: GSI Flame Treatment)
GS-360-4PM anchor rod heat shrinkable film flame treatment
Different anti-corrosion measures are adopted for bolt components with different corrosion mechanisms in different parts, and their anti-corrosion cost performance is much higher than traditional anti-corrosion measures; the full length of the anchor rod adopts flexible anti-corrosion measures such as heat shrinkable film and anti-corrosion grease.
Steel surface degreasing process During the process of processing, transportation, and storage of steel, the surface often has some oil stains, such as anti-rust oil applied for rust prevention, lubricating oil, chip oil, polishing paste applied for mechanical processing, Sweat, asphalt, etc. contaminated during handling. The presence of these oil stains will affect the quality of rust removal and phosphating, and reduce the bonding force between the coating and the substrate. The method of degreasing before painting Beicang company recommends flame metal surface treatment.
Flame treatment technology is widely used in metal heat treatment processes, such as steel plate surface degreasing, metal heat treatment, welding preheating, welding, secondary heating of metal processing, surface hardening, stress relief, etc., and flame treatment of metal zero The improvement of the physical properties of the parts facilitates further processing.
Flame treatment characteristics:
Shorten the heating time and increase the temperature quickly, effectively increase the hardness of the metal, and improve the fatigue strength of the metal
Product Features:
The use of high-strength and pressure-resistant aluminum alloy shell is light and safe, multi-row anti-blocking flame spray hole structure, indoor flame design; stainless steel fracture sealing pad is easy to disassemble, assemble and repair; pull-out adjustment baffle can effectively control the width of the flame and simple operation; -Style precision gas confluencer; easy to adjust the flow of gas and compressed air, including anti-reverse flow function; easy to operate both plug and play; recommended for fixed position use; optional electronic ignition device or installation of safety monitoring and detection system and precision flow control system.
Some parameters:
Flame temperature: oxidizing flame 1000~1200℃
Flame width: four groups of standard flame burner 150mm, adjustable flame width (no.GS-150PTS)
Flame thickness: standard 22MM
Ignition method: high frequency electronic single needle ignition; OK
Combustion gas: standard petroleum gas or natural gas
Combustion-supporting gas: compressed air 8KGf/CM2 is recommended to be connected to a stable and clean air source
Assembly and fastening: M5 bolts of flame window tightly inserted plate, M10 of mixed gas interface
Power supply: 220V/50Hz
北倉機械制造火焰前處理系統 (品牌:GSI 火焰處理)
GS-360-4PM錨桿熱縮膜火焰處理
針對不同部位不同腐蝕機理的錨桿組件采取不同的防腐措施,其防腐性價比要遠高于傳統的防腐措施;錨桿全長采用熱縮膜和涂防腐油脂的柔性防腐措施
鋼鐵表面除油工藝鋼鐵在加工、運輸、儲藏的過程中,表面往往會帶有一些油污,例如由于防銹需要所涂的防銹油,機械加工所涂的潤滑油、切屑油、拋光膏,搬運過程中污染上的汗水、瀝青等。這些油污的存在會影響除銹及磷化的質量,降低涂層與基體間的結合力。噴漆前除油的方法北倉公司推薦火焰金屬表面處理。
金屬的熱處理工藝中火焰處理技術應用廣泛,如鋼板表面去油膩、金屬熱處理,焊接預熱、焊接、金屬加工的二次補熱、表面淬硬、應力消除等工藝應用,經火焰處理的金屬零部件的物理特性得到改善有利于進一步深加工。
火焰處理特點:
加熱時間縮短快速升溫、有效提高金屬硬度、改善金屬抗疲勞強度
產品特性:
采用高強耐壓鋁合金外殼體輕便安全,多排防阻塞火焰噴孔結構,室內型火焰設計;不銹鋼斷口密閉墊便于拆卸裝配修整;抽拉式調節檔板可有效控制噴火寬度操作簡單;一體式精密氣體匯流器;便于調節燃?xì)馀c壓縮空氣流量,含防逆流功能;既插既用操作簡單;建議固定位置使用;可選配電子式點火裝置或加裝安全監測與檢測系統與精密流量控制系統。
部分參數:
火焰溫度:氧化火焰1000~1200℃
火焰寬度:標型火焰燒嘴150mm四組,噴火寬度可調(no.GS-150PTS)
火焰厚度:標準22MM
點火方式:高頻電子式單針點火;OK
燃燒氣體:標準石油氣或天然氣
助燃?xì)怏w:壓縮空氣8KGf/CM2建議接入穩定潔凈氣源
裝配緊固:火焰窗緊密插板M5螺栓、混合氣體界面M10
電源:220V/50Hz
13819815715
地址:余姚市馬渚鎮開元路90號
Q Q: 374475157
座機:0574-6246 0819
傳真:0574-6246 9626