GS-500-4HCS Round bottle Flame Treatment Machine

The PP plastic helmetsafety helmet needs to go through flame pretreatment before painting or printing to make the surface tension value above 48 dyne to ensure the adhesion of spraying or printing.

The flame pretreatment system of "Beicang Machinery" has sophisticated flame application technology; we have accumulated many years of experience, combined with advanced combustion safety control systems and spare parts. Each system is assembled and completed before leaving the factory. Strict quality inspection and testing to ensure its high quality

Industry Application

Flame treatment of polypropylene (PP) and polyethylene (PE) plastic surface is suitable for pipe/sheet surface treatment to increase the adhesion of printing and spraying and remove burrs; this equipment is specially designed for modification of helmets and safety helmets before painting Processing use.

Features  

Choose high-quality high-temperature corrosion-resistant belt chain plate transmission, can adjust the angle of four groups of nozzles arbitrarily to meet the needs of surface treatment of different shapes; flame system adopts PLC microcomputer electrical control, transmission part adopts advanced stepping motor, frequency conversion speed control Ways to adjust the speed to meet the different requirements of different workpieces.

"Beicang Machinery"'s proprietary flame injection process design burner effectively utilizes fuel efficiency to make its treatment effect higher; the flame system can use fuel LPG (liquefied gas) or Natural GAS (natural gas), propane; to ensure the safety of the system , The solenoid valve design is used on the gas circuit to ensure that the gas supply can be reliably shut down when abnormal; the whole machine has a novel structure, reasonable design, convenient operation, and movable casters at the bottom, which is convenient to move.

Adjustable rotation speed, automatic ignition function, adjustable stepping speed, safety net cover, gas leakage monitoring and alarm

technical parameter

Combustion nozzle size: a set of 300MM (NO.GS-D500TPS)

               200MM (NO.GS-D500TPS) one set

150MM (NO.GS-D150TPS) two groups

Combustion gas: LNG liquefied natural gas

Gas calorific value: LNG: 8700Kcal/m3

Maximum gas consumption: about LNG: 80L/min

Air consumption—maximum: 40m3/hr

Ignition mode, manual and automatic dual mode switching; controllable frequency of ignition and flameout

Combustion gas: compressed air 6KGf/CM2

Control voltage: 220V/50Hz;

Conveyor belt speed: 2-10m/min

Step speed: 0~999 seconds preset

Workpiece rotation: stepless speed regulation

Rotating fixture: 24PCS

Adjustment method: Conveyor belt frequency conversion speed regulation

Safety method: equipped with gas leakage monitor

Conveyor belt size: 2500×360mm (length×width)

Dimensions: 2500×1050×1950mm (length×width×height)

Weight: 350KG

GS-500-4HCS 頭盔火焰處理機Round bottle Flame Treatment Machine

PP塑料頭盔安全帽在噴漆或印刷前需經過火焰做前處理使表面張力值到48達因以上，來確保噴涂或印刷附著力

“北倉機械”之火焰前處理系統，擁有精細的火焰應用技術；我們累計多年的經驗，結合先進的燃燒安全控制系統和零配件，每一套系統在出廠前，都是組裝完成，并經過嚴格的品檢與測試，以確保其品質優良

行業應用

聚丙烯（PP）、聚乙烯（PE）塑料表面火焰處理適合于管/片材表面處理，使之增加印字與噴涂的附著力及去除毛刺；此設備專為設計頭盔、安全帽噴漆前改性處理使用。 

設備特點  
選用優質的高溫耐腐帶鏈板傳送，可任意調整四組噴嘴的角度，來適應不同形狀表面處理的需求；火焰系統采用PLC微電腦電器控制，傳動部分采用先進的步進馬達，變頻調速的方式調整速度，以適用不同工件的不同要求。

“北倉機械”專有火焰噴射的工藝設計的燒嘴有效利用燃料效率使之處理效果更高；火焰系統可使用燃料LPG(液化瓦斯）或Natural GAS（天然氣）、丙烷；為確保系統之安全，在燃?xì)饣芈飞鲜褂秒姶砰y設計，以確保異常時能確實的關閉燃?xì)夤┙o；整機結構新穎、設計合理、操作方便、底部裝有活動腳輪，移動方便。 

旋轉速度可調、自動點火功能、步進速度可調、安全防護網罩、燃?xì)庑孤┍O(jiān)測報警

技術參數
燃燒噴嘴尺寸： 300MM（NO.GS-D500TPS）一組

               200MM（NO.GS-D500TPS）一組

150MM（NO.GS-D150TPS）二組
燃燒氣體：LNG液化天然氣

瓦斯熱值：LNG:8700Kcal/m3

大瓦斯耗氣量：約LNG:80L/min

空氣消耗—大：40m3/hr 

點火方式，手動與自動 雙模切換；點火與熄火頻率可控
助燃?xì)怏w：壓縮空氣6KGf/CM2

控制用電壓：220V/50Hz；
輸送帶速度：2-10m/min

步進速度：0~999秒預設

工件自轉：無極調速

旋轉治具：24PCS
調整方式：輸送帶變頻調速

安全方式：配置燃?xì)庑孤┍O(jiān)測儀
輸送帶尺寸：2500×360mm（長×寬）
外形尺寸：2500×1050×1950mm （長×寬×高）
重量：350KG